Diva Server for Windows NT - Version 7.0 International
| Build: |
104-317 |
| Created: |
Mon Mar 8 16:47:33 GMT 2004 |
| Uploaded: |
Mon Mar 8 17:30:08 GMT 2004 |
| Status: |
final |
| Access: |
free |
| Description |
 |
Diva Server for Windows NT allows Eicon Diva Server adapters to be used with a Windows NT 4.0 workstation or server. It supports RAS & RRAS (client and server mode) and fax, voice and modem applications as well as Voice over IP (VoIP).
Diva Server for Windows NT supports the installation of multiple Eicon Diva Server adapters in one computer.
New features and components:
- Support for new Diva Server PRI version 3.0 and Diva Server V-PRI adapters
- Automatic Gain Control (AGC) for conferencing
- Pulse detection for R2 protocols
- Implicit and explicit call transfer
- Support of channelized (Trunk Mode) and unchannelized protocols
- VN 4/6 (French protocol)
Note that the Diva Server version 1.0 hardware has been discontinued and is therefore no longer supported by this driver software. On systems that contain only version 1.0 hardware version 7.0 can not be installed. The install process will terminate with a corresponding message. Mixed installations of version 1.0 hardware and new hardware are supported with version 7.0. An update package can be obtained from the following web page:
http://www.eicon.com/worldwide/products/MediaGateways/eol/eol.htm
Note that version 7.0 is the last Diva Server software to be released with Windows NT support.
To find out more, please go to Diva Server for Windows NT.
| Status |
|
This is a released Product.
| Availability |
|
 This software is available free
of charge. You may download it and use it with any appropriate Eicon ISDN hardware
which you legally acquired.
Note though that it is not public domain. Therefore, you must not redistribute, modify
or reverse engineer it or use it otherwise than intended with Eicon ISDN hardware.
| Download |
|
Please Note: It is not recommended to make upgrades in mission critical scenarios prior
to testing in an ‘offline’ environment. Also check the list of new features to make sure that
there are benefits for your environment. If there is no specific benefit, maintaining your known
stable environment is recommended.
This software comes in packages. Each one
is a self-extracting, sealed ARJ archive. You can install the software from
your hard disk after extraction.
To download, proceed as follows:
1. Select an empty directory on a volume with sufficient
disk space.
2. Download either the complete product or choose an individual package:
Complete product:
Select the appropriate download from the following list:
Individual packages:
Select the appropriate download from the following list:
3. Extract the
archive(s) you downloaded.
4. Look for the README file(s) and proceed as explained there.
|
